Spherical aluminum nitride and its preparation method and application process

The biggest immediate challenge for the EU will be replenishing its depleted gas inventories. While the EU could still increase LNG imports from countries such as the US, such purchases would be more expensive.
Refilling natural gas storage space to historical average levels this year could cost 70 billion euros, a sevenfold increase, compared to 10 billion euros in previous years. "
A complete replacement for Russian gas is not only very expensive, but it also may not be possible.
In the next 12 months, there is little way to meet the demand for a "normal" year in the absence of Gazprom, which also includes Aluminum nitride (AlN).

Overview of spherical aluminum nitride AlN powder

Aluminum nitride (AlN) is a solid nitride of aluminum. It has a high thermal conductivity of 321w/(m · K) and is an electrical insulator. Its wurtzite phase (w-aln) has a band gap of about 6 EV at room temperature, which has potential applications in optoelectronics working at deep UV frequency.

Aluminum nitride AlN powder is stable at high temperatures in an inert atmosphere and melts at about 2200 °C. In vacuum, AlN decomposes at about 1800°C. In air, surface oxidation occurs above 700 ℃, and a 5-10 nm thick surface oxide layer is detected even at room temperature. This oxide layer protects the material at temperatures up to 1370 °C. Above this temperature, a large amount of oxidation will occur. It is stable at 980°C in hydrogen and carbon dioxide atmosphere. The material is slowly dissolved in inorganic acid through grain boundary erosion and in strong alkali through erosion of aluminum nitride grains. The material is slowly hydrolyzed in water. Aluminum nitride is resistant to most molten salts, including chloride and cryolite. Aluminum nitride can be patterned using reactive ion etching based on Cl2.

Aluminum nitride is an inorganic powder of high thermal conductivity material. Because of its excellent comprehensive properties such as high thermal conductivity, good insulation, low dielectric constant and expansion coefficient equivalent to Si material, it has attracted more and more attention. It is widely used in large-scale integrated circuits, high thermal conductivity substrates in electronic field, inorganic thermal conductivity fillers, high-performance structural ceramics and other fields.

With the advent of 5g era, all kinds of electronic devices are becoming more and more integrated, and the power is increasing. Higher requirements are put forward for its heat dissipation performance. For various packaging resins used in the electronic field, the best way for thermal conductive materials to improve their heat dissipation performance is to add inorganic insulating fillers with high thermal conductivity, and aluminum nitride is one of the best choices. Increasing the filling amount requires the powder to be dense spherical and the particle size range from tens of microns to hundreds of microns, so as to ensure the combination of large and small particles and achieve the purpose of high filling and good fluidity.

At present, the known preparation methods of spherical aluminum nitride powder are mainly carbothermal reduction method, direct nitriding method and in-situ nitriding method, but there are some defects in varying degrees, such as poor particle size distribution, insufficient sphericity, low density, loose and porous, which hinder its application in heat conducting materials.

Thermal spraying process: aluminum nitride powder can be thermally sprayed to form electrical insulation and thermal conductive coating. Chemical / physical vapor deposition (CVD/PVD): aluminum nitride coating is deposited by CVD or PVD to provide electrical insulation and thermal conductivity coating.  

Powder metallurgy (P/M): aluminum powder is pressed into parts by hot pressing or cold pressing and sintering.

Application of spherical aluminum nitride AlN powder

Aluminum nitride is a kind of inorganic powder with high thermal conductivity. Because of its high thermal conductivity, good insulation, low dielectric constant, and silicon material has considerable expansion coefficient and excellent comprehensive properties, it has attracted more and more attention. It is widely used in the fields of large-scale integrated circuits, electronic substrates, high thermal conductivity, thermal conductivity inorganic fillers, high-performance structural ceramics and so on.

With the advent of 5g era, the integration of various electronic devices is higher and higher, and the functions are more and more powerful. In order to improve the heat dissipation performance of various packaging resins used in the electronic field, the best way is to add inorganic insulating fillers with high thermal conductivity to the materials. Aluminum nitride is one of the best choices. In order to increase the filling amount, the powder is required to be dense and spherical, and the particle size ranges from tens of microns to hundreds of microns, so as to ensure that the particle size and particle size of the composite can achieve high filling and good fluidity

Due to the piezoelectric properties of AlN, epitaxially grown thin film crystalline aluminum nitride is used for surface acoustic wave sensor (SAW) deposited on silicon wafer. One application is RF filter, which is widely used in mobile phones. It is called thin film bulk acoustic resonator (FBAR). This is a MEMS device that uses aluminum nitride sandwiched between two metal layers. AlN is also used to construct piezoelectric micromechanical ultrasonic transducers that emit and receive ultrasound and can be used for aerial ranging over a distance of up to one meter. The metallization method allows AlN to be used in electronic applications similar to alumina and beryllium oxide. As inorganic quasi one-dimensional nanotubes, AlN nanotubes and carbon nanotubes have been proposed to be used as chemical sensors for toxic gases. At present, a lot of research has been carried out on the development of light-emitting diodes working under ultraviolet light using gallium nitride based semiconductors. Using aluminum gallium nitride alloy, the wavelength as short as 250 nm has been realized. In 2006, low efficiency aln# led emission at 210 nm was reported.

Price of spherical aluminum nitride AlN powder

The price of spherical aluminum nitride AlN powder particles will change randomly with the production cost, transportation cost, international situation, exchange rate, market supply and demand and other factors ofspherical aluminum nitride AlN powder. Tanki new materials Co.,Ltd. aims to help industries and chemical wholesalers find high-quality and low-cost nano materials and chemicals by providing a full range of customized services. If you are looking for spherical aluminum nitride AlN powder, please feel free to send an inquiry to obtain the latest price of spherical aluminum nitride AlN powder.

Spherical aluminum nitride AlN powder supplier

As a global supplier of spherical aluminum nitride AlN powder, Tanki new materials Co.,Ltd. has rich experience in the performance, application and cost-effective manufacturing of advanced and engineering materials. The company has successfully developed a series of powder materials (molybdenum disilicide), lanthanum nitride (LAN powder, calcium silicide, iron boride), high-purity targets, functional ceramics and structural devices, and provided OEM services.

Chemical Composition of Aluminum Nitride AlN powder

Recently, the first press conference of the Boao Forum For Asia Annual Conference 2022 was held. Two flagship reports were released at the conference: "Asia's Economic Prospects and Integration Process 2022" and "Sustainable Asia and the World 2022-Green Transformation in Action in Asia".

The flagship report points out that the global economy will recover in 2021, and the pace of economic integration in the Asia-Pacific has not stopped even in the face of the impact of COVID-19. The Asia-Pacific region has provided new impetus for the world's economic recovery and institutional building.  

The report gives an outlook on the Asian economy, noting that a number of factors will affect Asian economic growth. For example, mutated strains such as Delta and Omicron have become more transmissible, and many economies are experiencing epidemic peaks again. The Ukraine crisis has triggered geopolitical changes in Asia and Europe, leading to higher commodity prices, which may affect the global energy supply and energy transformation.

The report pointed out that the Asian economy will still be in the process of recovery in 2022, but the growth rate may moderate. According to the report, Asia's economic growth in 2022 is likely to be lower than the current IMF forecast, which is projected at 4.8%.

Affected by several factors, the supply of the Aluminum nitride (AlN) is erratic and thus its prices are expected to go higher in the future.

Inquiry us