• 0
  • 0

How to judge whether the bearing is damaged

According to the peeling, indentation, rust, crack, wear and so on will be reflected in the vibration measurement of combined bearings, the vibration of SKF bearings is very sensitive to the damage of bearings. Therefore, the amplitude of vibration can be measured by using a special bearing vibration measuring device (frequency analyzer, etc.), and the specific abnormal situation can not be inferred by frequency division. Due to the different use conditions of bearings or installation positions of sensors, the measured values are different, so it is necessary to analyze and compare the measured values of each machine in advance to determine the judgment criteria.
Because SKF bearings will emit abnormal and irregular sounds even if they are slightly damaged such as peeling, so the sound meter can be used to distinguish, and the sound meter can be used to check and sound size of the combined bearing rolling sound quality operation, play a preventive role.
If the temperature of SKF bearing outer ring can be directly measured by the oil hole, it is more appropriate. Under normal circumstances, the temperature of the bearing can be estimated according to the temperature outside the bearing seat. If the lubrication and installation parts are appropriate, the bearing temperature will rise sharply and abnormal high temperature will occur. In this case, stop the operation and take necessary precautions. In general, the temperature of the combined bearing rises slowly with the operation and reaches a stable state after 1-2 hours. The normal temperature of the bearing varies with the heat capacity, heat dissipation, speed and load of the machine. When necessary, the thermal sensor can be used to monitor the working temperature of the bearing at any time. When the temperature exceeds the set value or the burning shaft stops, the alarm will be automatically sent to the household.
When rotating the SKF bearing, it should be very smooth, there should be no abnormal noise, and there should be no impurities. Combined bearings are allowed to have slight operating noise during operation. If the noise is too large or there is abnormal noise or impact, it indicates that the bearing fails. Bearing antirust treatment with slightly fragrant antirust oil, the amount is not large. Make the whole combination bearing clean and fragrant. During the normal use of SKF bearings, a certain temperature is allowed at the position where the bearings are installed. It is normal not to feel heat when you touch the mechanical housing with your hand. If the temperature of the rolling bearing is too high, the quality of lubricating oil can be considered to meet the requirements or deterioration, and the viscosity of lubricating oil is too high; Or the installation mechanism is too tight, the bearing is too tight, the bearing retainer or rolling element is broken.

Inquiry us

Our Latest Products

What is Zinc Sulfide ZnS Product?

Zinc sulfide ZnS is an inorganic compound, which is a white or light yellow powder with excellent fluorescence effect and electroluminescence function, especially nano-zinc sulfide has a unique photoelectric effect, which is used in electricity, magn…

Description of zinc stearate

The zinc stearate liquid is called zinc stearate emulsion. It has a wide range of applications and can be used as a release agent, color retention agent,…

The preparation method of lithium sulfide

Lithium sulfide, molecular formula: Li2S, lithium sulfide, molecular weight: 45.95. White to yellow crystals. With an anti-fluorite structure.…