Russia's insistence on paying for Russian gas in rubles has rattled European countries: Greece held an emergency meeting of suppliers, the Dutch government would urge consumers to use less gas, and the French energy regulator told consumers not to panic. Russian gas meets one-third of Europe's annual energy needs.
Russia said they could expand their demand for ruble payments for other commodities, including oil, grain, fertilizer, coal, and metals, which raised the risk of recession in Europe and the US.
Moscow is expected to unveil its ruble payment plan in early April, but it said it would not immediately ask buyers to pay for gas in rubles.
Western countries have said paying in rubles would be a breach of contract, and renegotiation could take months or longer. This uncertainty has pushed commodity market prices higher.
The supply and prices of other commodities like the manganese dioxide could also be affected.
Overview of manganese dioxide
Manganese oxide is an inorganic compound with the molecular formula of manganese dioxide. This black or brown solid naturally exists as the mineral pyrolusite, which is the main ore of manganese and a component of manganese nodules. The main use of MnO2 is for dry batteries, such as alkaline batteries and zinc-carbon batteries. MnO2 is also used as a precursor for pigments and other manganese compounds (such as KMn4). It is used as a reagent in organic synthesis, for example for the oxidation of allyl alcohol. MnO2 is an alpha polymorph that can incorporate various atoms (and water molecules) in the "tunnels" or "channels" between the manganese oxide octahedra. People are very interested in α-MnO2 as a possible cathode for lithium ion batteries. Several polymorphs and hydrated forms of MnO2 are claimed. Like many other dioxides, MnO2 crystallizes in the rutile crystal structure (this polymorph is called pyrolusite or β-MnO2), with a three-coordinate oxide and an octahedral metal center. MnO2 has a non-stoichiometric characteristic: hypoxia. The complex solid-state chemistry of this material is related to the amount of "freshly prepared" MnO2 in organic synthesis.
There are several preparation methods. One method is to start with natural manganese dioxide and then use dinitrogen tetroxide and water to convert it into a manganese (II) nitrate solution. The evaporation of water leaves crystallized nitrates. At a temperature of 400°C, the salt decomposes, releasing N2O4 and leaving a purified manganese dioxide residue. Naturally occurring manganese dioxide contains impurities and a considerable amount of manganese(III) oxide. Only a limited number of deposits contain the γ modification in purity sufficient for the battery industry. Production of batteries and ferrite (two of the primary uses of manganese dioxide) requires high purity manganese dioxide. Batteries require "electrolytic manganese dioxide" while ferrites require "chemical manganese dioxide".
Applications of manganese dioxide
The main use of MnO2 is as a component of dry batteries: alkaline batteries (so-called Leclanché batteries) or zinc-carbon batteries. Approximately 500,000 tons are consumed annually for this purpose. Other industrial applications include the use of MnO2 as inorganic pigments in ceramic and glass manufacturing. Thus far, researchers have focused exclusively on the color properties of manganese oxides, however, decorative use might imply that any black material soft enough to mark and resilient enough for the mark to remain could have been used. Indeed, both carbon-rich materials and black manganese ores were used in the production of Upper Palaeolithic cave art.
Manganese dioxide is specially used as an oxidant in organic synthesis. The effectiveness of the reagent depends on the preparation method, which is a typical problem with other heterogeneous reagents, where surface area and other variables are an important factor. Manufacturing bad reagents. However, in general, the reagent is produced in situ by treating the KMnO4 aqueous solution with Mn(II) salt (usually sulfate). The configuration of the double bond in the reaction is conservative. The corresponding alkynol is also a suitable substrate, although the resulting propargyl aldehyde can be very active. Benzoic acid and even unactivated alcohol are also good substrates. 1,2-diol is cleaved by MnO2 into dialdehyde or diketone. In addition, the applications of MnO2 are diverse. It can be applied to a variety of reactions, including amine oxidation, aromatization, oxidative coupling and thiol oxidation.
Manganese dioxide price
Manganese dioxide price will vary randomly with the production cost, transportation cost, international situation, exchange rate, and market supply and demand of manganese dioxide. Tanki New Materials Co.,Ltd Aims to help All industries and Chemical Wholesalers to find high quality, cheap price Nanomaterials and chemicals by providing turn-key customize manufacturing services. If you are looking for manganese dioxide, please feel free to send an inquiry for the latest price of manganese dioxide.
Manganese dioxide supplier
As a global manganese dioxide supplier, Tanki New Materials Co.,Ltd has rich experiences in the properties, applications, and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (including oxides, carbides, nitrides, single metal, etc.), high-purity targets, functional ceramics, and structural devices, OEM service is available.
More information about manganese dioxide
Manganese Dioxide Properties
535 °C (995 °F; 808 K) (decomposes)
Solubility in water
Manganese Dioxide Structure
Tetragonal, tP6, No. 136
a = 0.44008 nm,
b = 0.44008 nm,
c = 0.28745 nm
Formula units (Z)
Related manganese oxide
3D printing technology emerged in the mid-1990s and is actually the latest rapid prototyping device utilizing technologies such as light curing and paper lamination. It is basically the same as ordinary printing. The printer is equipped with "printing materials" such as liquid or powder. After connecting to the computer, the "printing materials" are superimposed layer by layer through computer control, and finally the blueprint on the computer is turned into a real thing. This printing technology is called 3D stereo printing technology.
Zinc sulfide ZnS is an inorganic compound, which is a white or light yellow powder with excellent fluorescence effect and electroluminescence function, especially nano-zinc sulfide has a unique photoelectric effect, which is used in electricity, magn…
The zinc stearate liquid is called zinc stearate emulsion. It has a wide range of applications and can be used as a release agent, color retention agent,…