Answers

  • 0
  • 0

Nano-diamond is the key to efficient hydrogen purification, the graphene vs ceramic coating introduction of new materials

Nano-diamond is the key to efficient hydrogen purification, the graphene vs ceramic coating introduction of new materials.

Nanodiamonds may be small, but they could help solve one of the biggest problems facing humanity today: climate change

Hydrogen is a clean fuel, leaving only water behind. Many countries see hydrogen as the way to a zero-carbon future, but switching to a hydrogen economy requires hydrogen to be produced much cheaper than it is today.

Professor Easan Sivaniah, iCeMS team leader, said: "There are several scalable ways to produce hydrogen, but hydrogen is usually a wet mixture and their purification is a challenge." "Membrane technology allows for an efficient and economical separation process. But we need the right membrane material to make it work." Sivaniah adds. Graphene oxide (GO) is a water-soluble derivative of graphite that can be assembled into a membrane for hydrogen purification. Hydrogen easily passes through these filters, and larger molecules get stuck. Hydrogen is usually separated from carbon dioxide or oxygen under very humid conditions. The go sheets are negatively charged, causing them to repel each other. When exposed to humidity, the negatively charged SHEETS repel each other, allowing water molecules to accumulate in the Spaces between the sheets, eventually dissolving the film. Dr Behnam Ghalei, who helped oversee the study, explained that adding nano-diamonds to the go flakes could solve the problem of humidity induced disintegration. "The positively charged nano-diamond counteracts the negative charge of the film, making the GO sheet denser and more water-resistant."

The team also includes other research groups from Japan and abroad. Advanced X-ray research was carried out by researchers at the Japan Synchrotron Radiation Research Institute (SPRING-8 / JASRI). The Quantum Life Sciences Institute (QST) helped develop the material. Shanghai University of Science and Technology (China) and National Central University (Taiwan) were involved in state-of-the-art material characterization. "In our collaboration with Dr. Ryuji Igarashi at QST, we were able to obtain nanodiamonds with well-defined sizes and functions that would not have been possible without these studies," Sivaniah said. "Importantly, Igarashi team has a proprietary technology that could scale up nanodiamond production at a reasonable cost in the future." Nanodiamonds have other potential uses beyond hydrogen production, Sivaniah says. Humidity control is also crucial in many other areas, including pharmaceuticals, semiconductors and lithium-ion battery production. Membrane technology can also revolutionize air conditioning by effectively removing humidity. Air conditioning is one of the least efficient ways to cool down because a lot of electricity is used to remove humidity, creating more carbon dioxide emissions and creating a vicious cycle of global warming. The Japanese government is firmly committed to a zero-carbon future. China has also set up a $20 billion Green Innovation Fund to support cooperation between major industry players and start-ups that bring new technologies to the market.

New materials for a sustainable future you should know about the graphene vs ceramic coating.

Historically, knowledge and the production of new materials graphene vs ceramic coating have contributed to human and social progress, from the refining of copper and iron to the manufacture of semiconductors on which our information society depends today. However, many materials and their preparation methods have caused the environmental problems we face.

About 90 billion tons of raw materials -- mainly metals, minerals, fossil matter and biomass -- are extracted each year to produce raw materials. That number is expected to double between now and 2050. Most of the graphene vs ceramic coating raw materials extracted are in the form of non-renewable substances, placing a heavy burden on the environment, society and climate. The graphene vs ceramic coating materials production accounts for about 25 percent of greenhouse gas emissions, and metal smelting consumes about 8 percent of the energy generated by humans.

The graphene vs ceramic coating industry has a strong research environment in electronic and photonic materials, energy materials, glass, hard materials, composites, light metals, polymers and biopolymers, porous materials and specialty steels. Hard materials (metals) and specialty steels now account for more than half of Swedish materials sales (excluding forest products), while glass and energy materials are the strongest growth areas.

New materials including the graphene vs ceramic coating market trend is one of the main directions of science and technology development in the 21st century

With the development of science and technology, people develop new materials graphene vs ceramic coating on the basis of traditional materials and according to the research results of modern science and technology. New materials are divided into metal materials, inorganic non-metal materials (such as ceramics, gallium arsenide semiconductor, etc.), organic polymer materials, advanced composite materials. According to the graphene vs ceramic coating material properties, it is divided into structural materials and functional materials. Structural materials mainly use mechanical and physical and chemical properties of materials to meet the performance requirements of high strength, high stiffness, high hardness, high-temperature resistance, wear resistance, corrosion resistance, radiation resistance and so on; Functional materials mainly use the electrical, magnetic, acoustic, photo thermal and other effects of materials to achieve certain functions, such as semiconductor materials, magnetic materials, photosensitive materials, thermal sensitive materials, stealth materials and nuclear materials for atomic and hydrogen bombs.

One of the main directions of graphene vs ceramic coating science and technology development in the 21st century is the research and application of new materials. The research of new materials is a further advance in the understanding and application of material properties.

About TRUNNANO- Advanced new materials Nanomaterials graphene vs ceramic coating supplier

Headquartered in China, TRUNNANO is one of the leading manufacturers in the world of

nanotechnology development and applications. Including high purity graphene vs ceramic coating, the company has successfully developed a series of nanomaterials with high purity and complete functions, such as:

Amorphous Boron Powder

Nano Silicon Powder

High Purity Graphite Powder

Boron Nitride

Boron Carbide

Titanium Boride

Silicon Boride

Aluminum Boride

NiTi Powder

Ti6Al4V Powder

Molybdenum Disulfide

Zin Sulfide

Fe3O4 Powder

Mn2O3 Powder

MnO2 Powder

Spherical Al2O3 Powder

Spherical Quartz Powder

Titanium Carbide

Chromium Carbide

Tantalum Carbide

Molybdenum Carbide

Aluminum Nitride

Silicon Nitride

Titanium Nitride

Molybdenum Silicide

Titanium Silicide

Zirconium Silicide

and so on.

For more information about TRUNNANO or looking for high purity new materials graphene vs ceramic coating, please visit the company website: nanotrun.com.

Or send an email to us: sales1@nanotrun.com 

 

Inquery us

Our Latest Answers

Global Lithium 12-Hydroxystearate,Overview of Lithium 12-Hydroxystearate,Lithium 12-hydroxystearate application,Lithium 12-hydroxystearate price,Lithium 12-Hydroxystearate Suppliers market trend 2023-2029 Wide application of lithium 12-hydroxystearate by

Lithium 12-hydroxystearate is a white powdery industrial product, which can be prepared by the direct reaction of 12-hydroxystearic acid and equimolar lithium hydroxide monohydrate. Can be used to formulate various greases.…

Global Chromium Diboride CrB2 Powder,Overview of Chromium Diboride CrB2 Powder,Application of Chromium Diboride CrB2 Powder,Chromium diboride CrB2 powder price,Chromium Diboride CrB2 Powder Supplier market trend 2023-2030 Application of Chromium Diboride

The chemical formula of chromium diboride is CrB2, which is a crystal with high hardness and melting point, and is chemically stable. Concentrated nitric acid is insoluble and can be directly mixed with elements or made from active metal reduction ox…

Global Cuprous Oxide Cu2O,Overview of Cuprous Oxide Cu2O, Application of cuprous oxide Cu2O powder,Cuprous oxide Cu2O powder price,Cuprous oxide Cu2O powder supplier market trend 2024-2027 What are copper and cuprous oxide? by Newsnight999

Cuprous oxide is a bright red powder, almost insoluble in water, decomposed into divalent copper and copper in acidic solution, and gradually oxidized into black copper oxide in humid air. Commonly used as a pigment, biocide and antifouling agent in…